Resources:
- Landscape photo
- Moon stock
- Glitter brushes
- Silhouette
- Dominoes stock
Before you start the tutorial make sure all of your stocks are open besides the landscape photo. Also make sure you've unzipped the brush pack.
Showing posts with label tips. Show all posts
Showing posts with label tips. Show all posts
Saturday, December 24, 2011
'Domino' Photo Manipulation
In this tutorial you will be creating a graphic that represents the song Domino by Jessie J.
Resources:
- Landscape photo
- Moon stock
- Glitter brushes
- Silhouette
- Dominoes stock
Before you start the tutorial make sure all of your stocks are open besides the landscape photo. Also make sure you've unzipped the brush pack.
Resources:
- Landscape photo
- Moon stock
- Glitter brushes
- Silhouette
- Dominoes stock
Before you start the tutorial make sure all of your stocks are open besides the landscape photo. Also make sure you've unzipped the brush pack.
Saturday, October 15, 2011
Retro Urban
Learn how to create 'retro urban' looking photographs and apply the same technique to close up and abstract photos to create your own textures. The possibilities are endless. Top - before. Bottom - after. Image from istockphoto.
1) Turn your photo to a high-contrast black and white.
1a. Go to Enhance - Adjust Color - Remove Color. [Shift+Ctrl+U]
1b. Go to Enhance - Adjust Color - Adjust Color Curves...
Look at the picture above for reference. Depending on your photograph you're going to have different settings. Basically you want to move the Highlights and Midtone Brightness sliders toward the right and the Midtone Contrast slider toward the left. To what extent you move your sliders depends on your photo. You want fairly high contrast, but you still want to be able to differentiate the details. For the Shadows slider you will rarely move the slider toward the right (only if your image is still very 'black' after pumping up the brightness) and if you do move it to the right, you will only a tad. More likely, you'll either leave it in the middle or move it to the left until the blacks stand out nicely.
I used the settings above. And here's how my black and white photo turned out:
2) Add the 'Urban'.
2a. Go to Layer - New Fill Layer - Solid Color. Choose #070736 (a dark blue). Click OK. Set the blend mode of this layer to Screen and the opacity to 79%.
2b. Go to Layer - New Fill Layer - Solid Color. Choose #86eefe (a bright turquoise). Click OK. Set the blend mode of this layer to Soft Light and the opacity to 79%.
3) Add the Blocks.
3a. Create a new layer. Using the Paint Bucket Tool, fill it with #808080 (50% gray).
3b. Go to Filter - Stylize - Extrude.
Depending on the size of your image you will set both the size and depth to a number between 50 and 200 pixels. Make sure you set both the size and depth at the same number.
My image is approximately 3000 by 2000 pixels and I'm using 200 px.
3c. Go to Filter - Stylize - Glowing Edges. [consult table below.]
3d. Go to Filter - Blur - Gaussian Blur. [consult table below.]
3e. Set the blend mode of this layer to 'Screen'.
3f. If you have a lot of shadow in your photo you might want to mask out some of the effect. I added a mask and painted on the bottom:
4. Add Texture.
4a. Create a new layer and fill it with #808080 (50% gray). Go to Filter - Texture - Patchwork.
Depending on your image size you want to use one of the settings below:
For my size I've used 9 and 17 for the Square Size and Relief respectively.
4b. Set the blend mode of this layer to Overlay and the opacity to 62%.
4c. Create a layer mask for this layer. Click on your background black and white layer. Select All (Ctrl + A), copy (Ctrl + C) and while holding down the ALT key on your keyboard click on the layer mask that you created at the beginning of this step. Paste (Ctrl + V).
4d. Go to Enhance - Adjust Lighting - Levels. Set the input values to the following: 0, .50, 179.
5. Add the 'Retro'.
5a. Press Ctrl + Alt + Shift + E. This will duplicate all visible layers and create a merged copy.
5b. Go to Filter - Render - Lighting Effects.... Set your settings to match the ones below. Click OK.
5c. {optional} Duplicate this layer. Apply the filter again (Ctrl + F) and set the duplicated layer's opacity to 63%.
You can also experiment with using this effect on random shots and then using it as a texture over another photo. Annoying I cannot remember exactly what settings I used on the photo below in terms of blend mode, etc. However, I think it could have been overlay. :/ I also added some color layers at different blend modes, masked out some area, and added a white vignette.
[this photo retro-urbanized] + [this photo] =
1) Turn your photo to a high-contrast black and white.
1a. Go to Enhance - Adjust Color - Remove Color. [Shift+Ctrl+U]
1b. Go to Enhance - Adjust Color - Adjust Color Curves...
Look at the picture above for reference. Depending on your photograph you're going to have different settings. Basically you want to move the Highlights and Midtone Brightness sliders toward the right and the Midtone Contrast slider toward the left. To what extent you move your sliders depends on your photo. You want fairly high contrast, but you still want to be able to differentiate the details. For the Shadows slider you will rarely move the slider toward the right (only if your image is still very 'black' after pumping up the brightness) and if you do move it to the right, you will only a tad. More likely, you'll either leave it in the middle or move it to the left until the blacks stand out nicely.
I used the settings above. And here's how my black and white photo turned out:
2a. Go to Layer - New Fill Layer - Solid Color. Choose #070736 (a dark blue). Click OK. Set the blend mode of this layer to Screen and the opacity to 79%.
2b. Go to Layer - New Fill Layer - Solid Color. Choose #86eefe (a bright turquoise). Click OK. Set the blend mode of this layer to Soft Light and the opacity to 79%.
3) Add the Blocks.
3a. Create a new layer. Using the Paint Bucket Tool, fill it with #808080 (50% gray).
3b. Go to Filter - Stylize - Extrude.
Depending on the size of your image you will set both the size and depth to a number between 50 and 200 pixels. Make sure you set both the size and depth at the same number.
My image is approximately 3000 by 2000 pixels and I'm using 200 px.
3c. Go to Filter - Stylize - Glowing Edges. [consult table below.]
3d. Go to Filter - Blur - Gaussian Blur. [consult table below.]
| Extrude Size/Depth | Glowing Edge Width, Brightness, and Smoothness Values | Gaussian Blur Radius |
| 50 px | 3, 10, 9 | 1 px |
| 100 px | 4, 10, 10 | 1.5 px |
| 150 px | 5, 10, 11 | 3 px |
| 200 px | 7, 10, 12 | 5 px |
3e. Set the blend mode of this layer to 'Screen'.
3f. If you have a lot of shadow in your photo you might want to mask out some of the effect. I added a mask and painted on the bottom:
4. Add Texture.
4a. Create a new layer and fill it with #808080 (50% gray). Go to Filter - Texture - Patchwork.
Depending on your image size you want to use one of the settings below:
| Square Size | Relief |
| 2 | 10 |
| 4 | 14 |
| 6 | 13 |
| 8 | 16 |
| 9 | 17 |
For my size I've used 9 and 17 for the Square Size and Relief respectively.
4b. Set the blend mode of this layer to Overlay and the opacity to 62%.
4c. Create a layer mask for this layer. Click on your background black and white layer. Select All (Ctrl + A), copy (Ctrl + C) and while holding down the ALT key on your keyboard click on the layer mask that you created at the beginning of this step. Paste (Ctrl + V).
4d. Go to Enhance - Adjust Lighting - Levels. Set the input values to the following: 0, .50, 179.
5. Add the 'Retro'.
5a. Press Ctrl + Alt + Shift + E. This will duplicate all visible layers and create a merged copy.
5b. Go to Filter - Render - Lighting Effects.... Set your settings to match the ones below. Click OK.
You can also experiment with using this effect on random shots and then using it as a texture over another photo. Annoying I cannot remember exactly what settings I used on the photo below in terms of blend mode, etc. However, I think it could have been overlay. :/ I also added some color layers at different blend modes, masked out some area, and added a white vignette.
[this photo retro-urbanized] + [this photo] =
Tuesday, June 28, 2011
Sunshine Lomo Effect
It's been forever since I posted, so I've decided to change it up a little before updating again.
Instead of frequently uploading papers and elements, I'm going to stick to occasionally (every month or so?) giving out overlays, textures, or brushes for download.
I am going to try to post a tutorial every week. It could be short, long, or in between. It could be about digi scrapping, photo editing, or graphic making. This particular one is on how to achieve a 'sunshine lomo effect'.
In this little tip we'll make the transition from this
1. Open up your photo in Photoshop Elements. This technique works best with outdoor sunny shots.
2. Duplicate your background layer and hide the background layer (because you don't want to make any changes on the original).
3. Duplicate this layer again.
4. Go to Filter - Render - Lighting Effects.
5. Adjust your settings so it is similar to mine.
6. On the left hand side click the point where you want most of the light to be focused. In this particular photo, I'm focusing the light where the boat is.
7. Click OK.
8. Now you will notice that most of the photo darkens with only the part you selected (in my case the boat) lighted up. Use a large soft eraser to erase the dark parts. Do not erase the bright spot.
9. Right click on the light spot layer in your layers palette/panel and select 'Merge Down'. Now you will have one layer with both the photo and light spot.
10. Duplicate this photo/light spot layer and go to Enhance - Convert to Black and White
11. Select 'Infrared Effect'. Then click OK.
12. Set the blend mode of the B/W layer to Luminosity.
13. Go to Layer - New Adjustment Layer - Hue/Saturation.
14. Lower the Saturation to -30.
15. Click OK. Then go to Layer - New Adjustment Layer - Levels. Click the drop down menu at the top that says RGB to switch to different channels. We will be altering the settings of all the Red, Green, and Blue channels individually. Alter your settings to match the screenshot below.
16. Right click on any layer and select 'Merge Visible'. This will merge together all the layers except the original Bakground layer.
17. Go to Filter - Correct Camera Distortion. Under the Vignette options move the slider significantly to the right for a bright vignette.
18. You are done. :)
For this particular photo I decided I wasn't that satisfied with the final result. It was too lomo, and less sunshine for me. Plus I wanted to add some pink hues to bring back that 'rising sun' color from the original.
So, during step #5 I positioned the light near the horizon and click OK.
Then I reapplied the lighting effects filter, this time at the boat with the Intensity-Full slider more to the right. I toned down the space in between using a soft eraser set as low opacity.
After I had completed all the steps, I went to Enhance - Adjust Color - Color Variations. I selected 'Highlights' as the area I wanted to adjust, left the color intensity slider as is, and clicked on the 'Decrease Green' button once.
You can see how the final turned out below:
Instead of frequently uploading papers and elements, I'm going to stick to occasionally (every month or so?) giving out overlays, textures, or brushes for download.
I am going to try to post a tutorial every week. It could be short, long, or in between. It could be about digi scrapping, photo editing, or graphic making. This particular one is on how to achieve a 'sunshine lomo effect'.
In this little tip we'll make the transition from this
to this
2. Duplicate your background layer and hide the background layer (because you don't want to make any changes on the original).
3. Duplicate this layer again.
4. Go to Filter - Render - Lighting Effects.
5. Adjust your settings so it is similar to mine.
6. On the left hand side click the point where you want most of the light to be focused. In this particular photo, I'm focusing the light where the boat is.
7. Click OK.
8. Now you will notice that most of the photo darkens with only the part you selected (in my case the boat) lighted up. Use a large soft eraser to erase the dark parts. Do not erase the bright spot.
9. Right click on the light spot layer in your layers palette/panel and select 'Merge Down'. Now you will have one layer with both the photo and light spot.
10. Duplicate this photo/light spot layer and go to Enhance - Convert to Black and White
11. Select 'Infrared Effect'. Then click OK.
12. Set the blend mode of the B/W layer to Luminosity.
13. Go to Layer - New Adjustment Layer - Hue/Saturation.
14. Lower the Saturation to -30.
15. Click OK. Then go to Layer - New Adjustment Layer - Levels. Click the drop down menu at the top that says RGB to switch to different channels. We will be altering the settings of all the Red, Green, and Blue channels individually. Alter your settings to match the screenshot below.
16. Right click on any layer and select 'Merge Visible'. This will merge together all the layers except the original Bakground layer.
17. Go to Filter - Correct Camera Distortion. Under the Vignette options move the slider significantly to the right for a bright vignette.
18. You are done. :)
For this particular photo I decided I wasn't that satisfied with the final result. It was too lomo, and less sunshine for me. Plus I wanted to add some pink hues to bring back that 'rising sun' color from the original.
So, during step #5 I positioned the light near the horizon and click OK.
Then I reapplied the lighting effects filter, this time at the boat with the Intensity-Full slider more to the right. I toned down the space in between using a soft eraser set as low opacity.
After I had completed all the steps, I went to Enhance - Adjust Color - Color Variations. I selected 'Highlights' as the area I wanted to adjust, left the color intensity slider as is, and clicked on the 'Decrease Green' button once.
You can see how the final turned out below:
Subscribe to:
Posts (Atom)